ACS Smart Card Reader Testing and Utilities Centre
← View all smart card and RFID readers
How do you test an ACS smart card or NFC reader? Plug it in and check that Windows lists it under Smart card readers in Device Manager. Make sure the Windows Smart Card service is running. Then open a tool that watches the reader, such as ACS QuickView, and insert or tap a card: the tool should show the card arrive, and show it leave when you take it away. If all three checks pass, the reader, its driver and the Windows PC/SC layer are working, and you have not written any code.
This page is BSD Infotech's starting point for testing ACS readers. It explains which tool checks what, which tool suits the ACR1252U, ACR1552U, ACR122U and ACR39U, and where to download each one. Official ACS tools come straight from Advanced Card Systems (ACS) at acs.com.hk and are free; ACS asks for a short registration (name, company, country, email) before you download its utility tools, while its drivers download directly. BSD Infotech is an independent ACS supplier and integrator, not the manufacturer. Our own free utilities are listed separately, so it is always clear whose software you are running.
Before You Test
- A Windows 10 or Windows 11 PC with a free USB port. Plug the reader straight into the computer for the first test, not into a hub, dock or monitor port.
- The ACS driver for your model, from the official ACS download page linked in the reader table below. Our guide to installing ACS reader drivers on Windows 10 and 11 walks through it.
- A card the reader supports. Contactless readers such as the ACR1252U, ACR1552U and ACR122U need a 13.56 MHz contactless card or tag, for example MIFARE Classic, MIFARE Ultralight, NTAG or DESFire. The ACR39U is a contact reader and needs a chip card inserted into its slot. A test with no card only proves half of the setup.
- Close other card software before you test. Another program that has already connected to the card can stop a test tool from reaching it.
Test an ACS Reader Without Code: 3 Basic Checks
These three checks use only Windows and one free tool. Do them in this order: each one depends on the one before.
Check 1: Windows Detects the Reader (Device Manager)
- Plug in the reader and wait a few seconds.
- Right-click the Start button and choose Device Manager.
- Expand Smart card readers. Your reader should be listed there. The name usually includes the model, for example ACR1252U or ACR39U.
- Unplug the reader: the entry should disappear. Plug it back in: it should come back. This tells you the USB connection is stable.
If the reader is missing, look under Other devices or Universal Serial Bus devices for an unknown device with a yellow warning mark. That usually means the driver is missing or failed to install. Install the driver from the reader's ACS download page, then unplug and replug the reader. Some ACS readers also work with the generic Windows smart card driver. In that case Device Manager can show a generic Microsoft name instead of the model name until the ACS driver is installed.
Check 2: The Windows Smart Card Service Is Running
- Press Windows + R, type
services.mscand press Enter. - Find Smart Card in the list. With the reader plugged in, its status should be Running.
- If it is stopped, right-click it and choose Start. On a company PC, ask your IT team if it will not start, because a policy may have disabled it.
Every PC/SC program, including the ACS tools, the BSD utilities and most card software, talks to the reader through this service. If it is not running, they all report that no reader is found, even when Device Manager shows the reader.
Check 3: A Tool Sees the Card Arrive and Leave
- Install ACS QuickView from the ACS utility tools page, or use one of the BSD utilities.
- Open it and pick your reader from the list.
- Tap a contactless card flat on the reader, or insert a contact card chip-first into the ACR39U. The tool should show that a card is present, with the card's details.
- Take the card away. The tool should show that the card has gone.
- Repeat a few times. A reader that reports every arrival and removal is working at the PC/SC level.
Passing all three checks shows the hardware, the driver and Windows are fine. If a project still fails after this, the problem is usually in the application, the card type or the card's keys rather than in the reader. The next step is a model-specific test (see the model guides) or an APDU test with the ACS Script Tool or Web APDU Tool.
Which Test Tool Should You Use?
Choose the tool by the question you are trying to answer. Official ACS tools are free downloads from acs.com.hk after a short ACS registration form (drivers download without one). The BSD utilities are free BSD Infotech software, downloaded after a one-time email check (OTP).
| What you want to check | Tool to use | Who makes it |
|---|---|---|
| Does Windows see the reader at all? | Device Manager, then the Smart Card service (checks 1 and 2) | Built into Windows |
| Does the reader detect a card being inserted, tapped or removed? | ACS QuickView | ACS (official) |
| Does a specific command (APDU) get the right response from the card or reader? | ACS Script Tool, or the browser-based ACS Web APDU Tool | ACS (official) |
| Can I try MIFARE Classic or MIFARE Ultralight functions, or ACS ACOS cards, without code? | ACS Smart Card and Reader Tool | ACS (official) |
| Can the reader type the card UID into any program, like a keyboard? | ACS ACR15XX Keyboard Configuration Tool, or the ACR1552U Configuration Tool on its ACS download page | ACS (official) |
| Can I read and write MIFARE, NTAG or DESFire cards that are still on their factory keys? | BSD ACR1252U or ACR1552U NFC Card Utility | BSD Infotech |
| Can I write and read a simple member record on a MIFARE Classic 1K card? | BSD ACR122U NFC Utility | BSD Infotech |
| Can I read and test SLE4428 / SLE4442 memory cards or ISO 7816 processor cards in a contact reader? | BSD ACR39U Smart Card Test Utility | BSD Infotech |
| Can I send APDUs from an iPhone or iPad? | ACS ApduTool (iOS) | ACS (official) |
None of these tools recovers or bypasses card keys. Testing reads and writes only cards you own, using keys you already know, such as the factory default keys.
Official ACS Test Tools and What Each One Tests
ACS publishes these tools for its own readers. Download them from ACS, so you always get the current version. BSD Infotech does not host ACS files. The descriptions below are our summary of what each tool is for. The ACS pages are the reference for versions and supported models.
ACS QuickView
Tests: reader detection and card presence. It lists the PC/SC readers it finds, shows details of the reader and of the card in it, and keeps polling, so you can watch a card being inserted and removed.
Use it for: the first test of any ACS PC/SC reader, and for proving a reader works before you blame it in a support case.
Windows, macOS and Linux versions · ACS utility tools page
ACS Script Tool
Tests: command and response. You send APDU commands, one at a time or as a saved script, and see the exact response bytes and status word.
Use it for: checking a command before you put it in code, for example getting a card UID, or repeating the same test sequence on many cards.
Windows, with separate macOS and Linux versions · ACS utility tools page
ACS Web APDU Tool
Tests: command and response, from a web browser. It needs ACS's APDU Bridge extension in Chrome or Edge, plus a small bridge host program on the PC that connects the browser to the reader.
Use it for: quick APDU tests on Windows 10 or later, macOS or Linux, and for checking whether a web-based card application is possible. ACS says it works with all its USB smart card readers.
Chrome or Edge · ACS Web APDU Tool page
ACS Smart Card and Reader Tool
Tests: card and reader features, through ready-made widgets instead of raw commands. ACS lists MIFARE Classic, MIFARE Ultralight, MIFARE Ultralight C, ACOS3, ACOS6 and ACOS6-SAM cards.
Use it for: trying out what a card can do without typing APDUs, when your card is one of the listed types.
Windows · ACS utility tools page
ACS ACR15XX Keyboard Configuration Tool
Tests and sets: keyboard emulation. It switches a supported reader into a mode where it types the card UID into any program as keyboard input. ACS lists the ACR1552 and ACR1581 among the supported models.
Note: ACS describes this as HID keyboard output, not CCID. Test it in a text editor, not in a PC/SC tool such as QuickView.
Windows · ACS utility tools page
Other ACS tools worth knowing
ACS Reader Monitor Program runs in the background, watches ACS PC/SC readers and connects to cards as they are inserted. ACS ApduTool (iOS) sends APDUs from an iPhone or iPad. The ACR1552U Configuration Tool on the ACR1552U download page is for its UID keyboard emulation mode only.
Free BSD Reader Utilities
BSD Infotech has written its own Windows utilities for the ACS readers we supply. They go one step further than a detection test: you can read and write real card data without writing software. They are BSD Infotech software, not ACS products, and ACS does not support them.
How the BSD downloads work
- Free, after a one-time email check. Choose the utility, enter your name, email, mobile and city, and type the one-time password (OTP) we email to you. The download then starts.
- Factory keys only. These editions work with cards that are still on their factory default keys (MIFARE Classic FF FF FF FF FF FF, DESFire all-zero, memory card PSC FFFF / FFFFFF). Cards that already carry your own keys need the Custom Key edition, which we supply on request.
- Licence key for some features. In the ACR1252U, ACR1552U and ACR39U utilities, reader and card detection is free, but reading and writing cards needs a licence key from BSD Infotech. Each utility card on the download page explains what is included.
| BSD utility | For reader | What it lets you test | Download |
|---|---|---|---|
| ACR1252U NFC Card Utility (Windows 10 / 11) | ACR1252U | MIFARE Classic 1K / 4K, NTAG and Ultralight (write a link or text), DESFire EV1 / EV2 / EV3 on factory keys, card identity for FeliCa and ISO 14443-4 cards, reader firmware, beep and LED | Get the ACR1252U utility |
| ACR1552U NFC Card Utility (Windows 10 / 11) | ACR1552U | Everything in the ACR1252U utility, plus ISO 15693 / ICODE tags. It detects the card type automatically. | Get the ACR1552U utility |
| ACR122U NFC Utility (Windows 10 / 11) | ACR122U | MIFARE Classic 1K: read the UID, then write, read and erase a member record (name, mobile, email, enrolment number, amount) | Get the ACR122U utility |
| ACR39U Smart Card Test Utility (Windows 10 / 11) | ACR39U | SLE4428 / 5528, SLE4442 / 5542 and AT24C memory cards, ISO 7816 processor cards such as SCOSTA, APDU console | Get the ACR39U utility |
The download links open the BSD utility download box on our smart card readers page. Using an ACS ACR35 with an Android phone? There is a BSD ACR35 Android utility too. Cards with your own keys? Ask for the Custom Key edition.
Which Tool for Which ACS Reader
QuickView and the Script Tool are listed by ACS for its PC/SC readers in general, and ACS says the Web APDU Tool works with all its USB readers, so those tools apply to all four models below. The table shows what is specific to each model.
| Reader | Card interface | Official ACS driver and model tools | Extra official tool that fits | BSD utility | BSD guide |
|---|---|---|---|---|---|
| ACR1252U USB NFC Reader III | Contactless 13.56 MHz (NFC) | ACR1252U downloads at ACS: PC/SC driver for Windows, macOS and Linux, Android EVK, API manual | Smart Card and Reader Tool for MIFARE Classic and Ultralight cards | ACR1252U NFC Card Utility | ACR1252U driver, software and test guide |
| ACR1552U USB NFC Reader IV | Contactless 13.56 MHz (NFC), including ISO 15693 tags | ACR1552U downloads at ACS: PC/SC driver, Configuration Tool (UID keyboard emulation), Android EVK, reference manual | ACR15XX Keyboard Configuration Tool. ACS also names the ACR1552U as a recommended model for the Web APDU Tool. | ACR1552U NFC Card Utility | ACR1552U driver, software and test guide |
| ACR122U USB NFC Reader (end of life) | Contactless 13.56 MHz (NFC) | ACR122U downloads at ACS: PC/SC driver (Windows MSI installer, macOS, Linux), Android EVK, API manual | Smart Card and Reader Tool for MIFARE Classic and Ultralight cards | ACR122U NFC Utility | ACR122U driver, software and test guide |
| ACR39U contact smart card reader | Contact (ISO 7816 chip cards) | ACR39U downloads at ACS: PC/SC driver for Windows, macOS and Linux, Android EVK, reference manual | Smart Card and Reader Tool for ACS ACOS3 and ACOS6 cards | ACR39U Smart Card Test Utility | ACR39U variants and prices |
Another ACS model? Find it in the ACS drivers, manuals and datasheets directory. Not sure which model you have? The model name is on the label under the reader, and Device Manager usually shows it once the driver is installed.
Reading the Test Results
Most failed tests come down to one of the causes below. Work from the top: a problem higher in the table hides the ones under it.
| What you see | Likely cause | What to do |
|---|---|---|
| Reader is not under Smart card readers in Device Manager | Driver missing, USB port or cable problem | Try another USB port directly on the PC, then install the driver from the reader's ACS download page (driver installation steps) |
| Reader is in Device Manager, but every tool says "no reader found" | Smart Card service stopped | Start the Smart Card service (check 2), then reopen the tool |
| Reader is found, but nothing happens when you tap or insert a card | Card type not supported by this reader, card held badly, or card damaged | Check the card type against the reader (for example, ISO 15693 tags need a reader such as the ACR1552U). Hold a contactless card flat and still in the centre. Try a second card. |
| The card is detected, but reading data fails | The card's keys are not the factory keys, or the wrong card type was chosen | Use the correct keys for your cards. The BSD factory-key editions cannot read cards that carry your own keys. Ask for the Custom Key edition, or test the command in the ACS Script Tool. |
| The tool worked a minute ago, but now it cannot connect to the card | Another program is holding the card | Close other card software, including other test tools, then try again |
| An ACR1552U types numbers into Notepad, but QuickView sees no card | Keyboard emulation mode is on | Test keyboard mode in a text editor. To test with PC/SC tools, check the reader's mode in the ACS configuration tool first. |
Model Guides and Next Steps
Driver, software and test guides by model
- ACR1252U driver, software and reader test guide, with the ACR1252U product page for specifications and price.
- ACR1552U driver and testing guide, with the ACR1552U reader page.
- ACR122U driver, software and test guide, with the ACR122U page and successor options.
- How to install ACS smart card reader drivers on Windows 10 and 11, for every model.
Step-by-step test guides
- How to test an NFC reader on Windows: a complete test plan with a printable checklist.
- How to read an NFC card UID without writing code, including byte order and hex vs decimal.
- How to test MIFARE Classic, Ultralight/NTAG and DESFire cards with factory keys.
- ACS QuickView installation and usage guide.
- Is the reader detected by Windows? and PC/SC reader status and error codes.
When the reader passes and you want to build software
- Smart card reader SDK and software integration: PC/SC, CCID and the ACS SDKs.
- SDK pages by model: ACR1252U SDK and developer resources, ACR1552U SDK and integration guide, and the ACR122U SDK for NFC development.
- All official ACS drivers, tools and SDK links in one place: the ACS resource centre.
Reader works, but you need an application?
BSD Infotech builds Windows, web and Android software around ACS readers and your cards, for attendance, access control, membership, cashless payment and card issuing. See NFC and smart card application development, compare models in ACR122U vs ACR1552U, or ask us for integration help.
Sources
Tool names, platforms, supported cards and supported models were checked on these official ACS pages on 16 Nov 2026. Version numbers change, so check the ACS page before you download. At that date ACS listed QuickView v2.18, Script Tool 5.2 for Windows and Smart Card and Reader Tool v4.0.1.8.
- ACS utility tools
- ACS Web APDU Tool
- ACS driver pages for the ACR1252U, ACR1552U, ACR122U and ACR39U
BSD Infotech is an independent ACS supplier and integrator, not the manufacturer. ACS, the ACS logo and ACS product names belong to Advanced Card Systems Ltd.
