ACR122U Driver, Software and Reader Test Guide
← Back to the ACS testing and utilities centre
Where do you get the ACR122U driver, and how do you check the reader works? Download the MSI Installer for PC/SC Driver from the official ACS ACR122U download page and install it before you plug in the reader. ACS lists it for Windows XP through Windows 11, so the same installer covers Windows 10 and Windows 11. Then confirm the reader under Smart card readers in Device Manager, make sure the Windows Smart Card service is running, and tap a card while a test tool such as ACS QuickView or the free BSD ACR122U utility is open. If the tool sees the card, the reader, driver and Windows PC/SC layer are all working.
This page is the step-by-step setup and test guide. For the reader itself (specifications, price in India, end-of-life status and successor options) see the ACR122U USB NFC reader page. BSD Infotech is an independent ACS supplier and integrator, not the manufacturer. Every driver and ACS tool on this page is linked to Advanced Card Systems (ACS) at acs.com.hk; BSD does not host ACS files.
What You Need Before You Start
- An ACR122U reader and its USB cable. ACS warns that counterfeit ACR122U units are sold, and that they may behave inconsistently and have no manufacturer support. If a reader fails every step below on two PCs, its origin is worth checking with your supplier.
- A Windows 10 or Windows 11 PC where you can approve an administrator prompt, because installing a driver needs one.
- A 13.56 MHz contactless card or tag, for example MIFARE Classic 1K, MIFARE Ultralight or an NTAG sticker. The ACR122U does not read contact chip cards (inserted into a slot) or 125 kHz proximity cards, so a test with one of those will always fail.
- Other card software closed. A program that has already connected to the reader can block a test tool.
Step 1: Get the Official ACR122U Driver
Open the ACS ACR122U drivers and manuals page (acs.com.hk, opens in a new tab). Free download, no form. It lists two Windows packages for desktop Windows:
| Package on the ACS page | Version and ACS date | Windows versions ACS lists | Which one to choose |
|---|---|---|---|
| MSI Installer for PC/SC Driver | 4.2.8.0, 20 Mar 2018 | Windows XP, Vista, 7, 8, 8.1, 10 and 11; Windows Server 2003 to 2016 R2 | Use this one. It is a normal Windows installer: run it, accept the prompts, done. |
| PC/SC Drivers | 4.2.8.0, 20 Mar 2018 | The same list as the MSI installer | The same driver version without the installer wrapper, for IT teams that deploy drivers their own way. |
Versions, dates and operating systems as shown on the ACS ACR122U download page, checked on 16 Nov 2026. ACS can publish a newer version at any time, so always take the file from the ACS page rather than from a copy. The same page also has drivers for Linux, macOS, Android and Windows CE, the technical specification and the API manual; the full ACR122U driver table on the product page lists them all.
Why the date is 2018: the ACR122U is end of life at ACS, so its Windows driver is no longer being updated. ACS still lists Windows 10 and 11 for it. That is the reason ACS recommends a current model for new projects (see end of life and successor).
Step 2: Install the ACR122U Driver on Windows 10 and 11
The steps are the same on Windows 10 and Windows 11. Only the look of the windows differs.
- Unplug the ACR122U. Installing the driver first and connecting the reader afterwards lets Windows pick up the ACS driver straight away.
- Download the MSI Installer for PC/SC Driver from the ACS ACR122U page. If the download is a ZIP file, right-click it, choose Extract All, and open the extracted folder.
- Run the installer. Double-click the
.msifile. Windows shows a User Account Control prompt: choose Yes. If SmartScreen shows a warning, check that the file came from acs.com.hk before you continue. - Follow the installer to the end and close it. Restart the PC if the installer asks you to.
- Plug the reader into a USB port on the PC itself, not into an unpowered hub, a keyboard or a monitor port. Wait a few seconds while Windows sets it up.
- Go to Step 3 and confirm that Windows has the reader.
Already plugged in before installing? That is fine. The ACR122U is a CCID-class reader, so Windows may have already set it up with its own generic smart card reader driver. Install the ACS package anyway, then unplug and reconnect the reader. Step 3 shows you how to see which driver Windows is using.
Installing ACS drivers for several models on one PC, or deploying them across a company? See the guide to installing ACS reader drivers on Windows 10 and 11.
Step 3: Confirm the Reader in Device Manager and the Smart Card Service
Device Manager
- Right-click the Start button and choose Device Manager.
- Expand Smart card readers. The ACR122U should be listed there with no yellow warning mark. ACS names its readers by model, so look for an entry containing ACR122.
- Unplug the reader: the entry should disappear. Plug it back in: it should return. This shows the USB connection is stable.
- To check the driver, right-click the entry, choose Properties and open the Driver tab. Driver Provider and Driver Version tell you whether Windows is using the ACS driver (compare the version with the one on the ACS page) or a generic Microsoft driver.
If the reader is not under Smart card readers, look under Other devices or Universal Serial Bus devices for an unknown device with a warning mark. That means the driver did not install: see the troubleshooting table.
The Windows Smart Card service
- Press Windows + R, type
services.mscand press Enter. - Find Smart Card. With the reader plugged in, its status should be Running. If it is stopped, right-click it and choose Start.
- Prefer the command line? Open Command Prompt and run
sc query SCardSvr. The STATE line should say RUNNING.
Every PC/SC program, from the ACS tools to the BSD utility and your own software, reaches the ACR122U through this service. If it is stopped, they all report "no reader found" even when Device Manager shows the reader. On a company PC, a policy can disable it: ask your IT team.
Optional: one PowerShell line for IT teams
To list smart card readers without opening Device Manager, run this in PowerShell. Each reader appears with its status (OK when it is working):
Get-PnpDevice -Class SmartCardReader
Step 4: Test the Reader with Official ACS Tools
ACS publishes free tools for all its PC/SC readers on the ACS utility tools page. ACS lists them for its PC/SC readers in general rather than naming the ACR122U, so they apply to it as a PC/SC reader. Three are useful here:
ACS QuickView: does the reader see the card?
Install QuickView, open it and select the ACR122U. Place a card flat on the reader: QuickView should show a card as present, with its details. Lift the card away: it should show the card has gone. Repeat a few times. Every arrival and removal reported means the reader works at the PC/SC level.
Windows, macOS and Linux versions · ACS utility tools page
ACS Script Tool: does a command work?
Sends APDU commands to the card or reader and shows the exact reply. Use it to try a command before you put it in code, for example the Get UID command in read a card UID.
Windows, with separate macOS and Linux versions · ACS utility tools page
ACS Smart Card and Reader Tool: what can the card do?
Explores card functions through ready-made widgets instead of raw commands. ACS lists MIFARE Classic, MIFARE Ultralight and Ultralight C among its supported cards, which are the card types most often used with the ACR122U.
Windows · ACS utility tools page
ACS Web APDU Tool: commands from a browser
A browser-based way to send commands, through ACS's APDU Bridge extension for Chrome or Edge and a small bridge program on the PC. ACS says it works with all its USB smart card readers.
Chrome or Edge · ACS Web APDU Tool page
What each ACS and BSD tool tests, for every reader model, is compared on the ACS reader testing and utilities centre.
Step 5: Test with the Free BSD ACR122U Utility
ACS does not publish an end-user application made only for the ACR122U. BSD Infotech wrote one for Windows 10 and 11 so that you can test real card data, not just card detection, without writing software.
BSD ACR122U NFC Utility
- What it does: reads the UID of MIFARE Classic 1K cards, and writes, reads and erases a simple member record (name, mobile, email, enrolment number and amount).
- Factory key only: it works with MIFARE Classic cards that are still on the factory key
FF FF FF FF FF FF. Cards that already carry your own keys need the Custom Key edition, which BSD supplies on request. - How to download: free, after a one-time email check. Choose the ACR122U utility, enter your details, and type the one-time password (OTP) we email you. The download then starts.
- Whose software: BSD Infotech's own, not an ACS product, and not supported by ACS.
How to use it as a test: complete steps 1 to 3 first. Then open the utility, place a factory-key MIFARE Classic 1K card on the reader and read the UID. To test writing as well, write a test record, read it back, and erase it. Use a spare test card, not a card that is already in use in a live system, because writing changes the card's data.
How to Read a Card UID with the ACR122U Without Code
The UID (unique identifier) is the serial number of a contactless card. Many attendance, access and membership systems only need the UID. There are two ways to see it without programming.
Option A: the BSD ACR122U utility (MIFARE Classic 1K)
Open the BSD ACR122U NFC Utility, place the card on the reader and read it. The UID is shown in hexadecimal. This is the quickest route if your cards are MIFARE Classic 1K.
Option B: one command in the ACS Script Tool or Web APDU Tool (any supported card)
- Open the ACS Script Tool or the ACS Web APDU Tool and select the ACR122U.
- Place the card on the reader and leave it there.
- Send the command
FF CA 00 00 00. This is the Get Data command that the ACS ACR122U API manual documents for reading the card UID. The reader answers it itself, so it works the same way for MIFARE Classic, MIFARE Ultralight, NTAG and other ISO 14443 cards. - Read the reply. It is the UID followed by the status word
90 00, which means success. Card UIDs are commonly 4 or 7 bytes long, depending on the card type.
| Reply ends with | Meaning | What to do |
|---|---|---|
90 00 | Success. The bytes before it are the UID. | Note the UID; the reader works for this card. |
63 00 | The reader could not complete the command. | Hold the card flat and still in the centre of the reader, then send it again. |
6A 81 | Function not supported. | Check the command bytes, and check the card is a type the ACR122U supports. |
| No reply, "no card" error | No card was connected when the command was sent. | Place the card first, then connect and send. |
ACS QuickView is the right tool for confirming that a card is detected. For the UID itself, use option A or B. Writing code to read the UID in your own application? The ACR122U SDK and pseudo-APDU guide has the command table and a C# example.
ACR122U Not Working? Troubleshooting
Work from the top. A problem higher in the table hides the ones under it.
| What you see | Likely cause | What to do |
|---|---|---|
| Nothing in Device Manager changes when you plug the reader in | USB port, hub or cable problem | Plug straight into a USB port on the PC (on a desktop, a rear port). Try another port and, if you have one, another PC. |
| Unknown device with a yellow warning mark under Other devices | Driver missing or failed to install | Install the MSI Installer for PC/SC Driver from the ACS ACR122U page, then unplug and reconnect the reader. |
| Reader listed, but the Driver tab shows a generic Microsoft driver | Windows set the reader up with its own CCID driver before the ACS driver was installed | Install the ACS package, then unplug and reconnect. If it still shows the generic driver, choose Update driver > Browse my computer > Let me pick and select the ACS entry. |
| Reader is in Device Manager, but every program says "no reader found" | The Windows Smart Card service is stopped or disabled | Start the Smart Card service (Step 3). On a managed PC, ask IT whether a policy disables it. |
| Reader found, but nothing happens when you tap a card | Unsupported card (contact chip card, 125 kHz proximity card), or the card is held badly | Use a 13.56 MHz card such as MIFARE Classic 1K or NTAG. Hold it flat on the centre of the reader, not at an angle. Try a second card. |
| Card detected, but reading data fails in the BSD utility | The card is not on the factory key, or it is not a MIFARE Classic 1K card | The utility reads factory-key MIFARE Classic 1K cards only. For cards with your own keys, ask for the Custom Key edition. The UID can still be read with option B in read a card UID. |
| A tool worked a minute ago, but now it cannot connect to the card | Another program is holding the reader or card | Close all other card software, including other test tools, and try again. |
| Windows says it is looking for a driver, or shows a "Smart card" device without a driver, each time a card is tapped | Windows' Smart Card Plug and Play looking for a driver for the card, not the reader | Usually harmless: the reader still works and test tools still see the card. Your IT team can turn this behaviour off by policy if it bothers users. |
| Reader stops responding after sleep or after hours of use | USB power saving, or a connection that dropped | Unplug and reconnect the reader. If it happens often, test another port, and ask IT about USB power-saving settings. |
| Behaviour is inconsistent on every PC | Faulty or non-genuine unit (ACS warns about counterfeit ACR122U readers) | Test a second reader. For new projects, consider the ACR1552U, which ACS recommends as the replacement. |
Still stuck? Testing steps for every ACS model are on the testing and utilities centre, or ask BSD Infotech for help with your reader model, Windows version and what you see.
ACR122U End of Life: What It Means for Setup
ACS marks the ACR122U as end of life and no longer recommends it for new deployments. ACS names the ACR1552U USB NFC Reader IV as the alternative. For readers you already have, the ACS driver and tools on this page still apply, and ACS still lists Windows 10 and 11 for the driver.
Planning a new project or replacing readers? Compare the two in ACR122U vs ACR1552U: migrating to the newer reader, and see the ACR1552U driver, software and test guide for its setup. Prices and availability for both are on the ACR122U reader page.
Sources
Driver packages, versions, dates and operating systems, the end-of-life status, the recommended successor and the tool names were checked on these official ACS pages on 16 Nov 2026. The Get Data (UID) command and its status words are from the ACS ACR122U API manual, which is listed on the ACS download page.
- ACS ACR122U drivers, manuals and datasheets
- ACS ACR122U product page
- ACS utility tools (QuickView v2.18, Script Tool 5.2 and Smart Card and Reader Tool v4.0.1.8 were listed at that date)
- ACS Web APDU Tool
BSD Infotech is an independent ACS supplier and integrator, not the manufacturer. ACS, the ACS logo and ACS product names belong to Advanced Card Systems Ltd.
